Circuit Breaker Installation Essentials

Circuit breaker installation requires a lot of considerations. Because this relates to electricity, it needs to be taken care of. Any carelessness can unleash havoc and that is completely unaffordable. You could hire an electrician to install it for you or you could go about the circuit breaker installation yourself. You need to be very careful if you go for the latter. You can’t afford to be careless and that is why you should know about everything before you take this step. Here are a few pointers for you so that you know how to go on about the circuit breaker installation process.

Circuit Breaker Installation Essentials

  • Know which type of circuit breaker panel you need first. There are many different panels based on voltages and you should choose depending on your requirements. Cutler Hammer brand provides a Cutler Hammer catalog for you to go through the various types and to select the best. For the house, even a 60 or 120V is enough. If you have too many electrical appliances in a large house, you might need a 200 V panel. You should thus first take some time out and determine what you need. You could make a list of the appliances in your house and then make a choice.
  • Remember that you need to be very safe during circuit breaker installation. Your first step should always be switching off the main power. You will be at the risk of receiving a fatal electric shock if the wires are still live. You need to even test the breaker that you are replacing to be absolutely sure that there is no power.
  • Even after switching off the power, you should take additional safety measures. Such steps include standing on a rubber mat and wearing rubber shoes while you are installing.
  • Using markers identification techniques is also a must. You have to test all the outlets and the areas in your house. Then you should label the breaker depending on the area that it is for. Labelling will make it easier for future reference for you and for the electricians. It can be very frustrating when you don’t label. Hence you must not skip this step.
  • It is always safer to let a professional electrician do the job for you. But if you want to do the circuit breaker installation yourself, you should always be very safe and confident. Safety comes first. It might cost you more to hire an electrician but it is worth it.